ACYMA-W235

Polycarboxylate Ether for Superplasticizer(PCE)

ACYMA-W235

Polycarboxylate Ether for Superplasticizer(PCE)

ACYMA-W235 is  PCE  that  has different  chemical  structure  from  typical PCE.

It is PCE that has excellent water reduction performance  and  good  flow-ability.  It  is  the  best  choice  for high  compressive  strength  concrete  by  low  W/C ratio.

Especially, it makes low stickiness concrete with good workability and shows stable performance at hot temperature as well  as  high  alkali condition.

Physical Properties

Compatibility

ACYMA-W235 is compatible with all of PCE products. To achieve either higher  water  reduction  or  longer retention, you may blend with other PCE which  has    its  specific properties.

ACYMA-W235 is compatible with Ligno base plasticizer.

Do not use blending with NSFC base superplasticizer.

Features

■ Excellent water reduction by powerful disper- sing effect

■ Excellent fluidity

■ Low  stickiness concrete

■ Cost-effective by Low dosage for high per- formance

Storage  and Handling

ACYMA-W235 should be stored at room temperature  and  it  should  be  avoided  from direct sunlight.

If stored in original unopened  container,  it  will  have  a  shelf  life  of  twelve  (12)  months.  If  product is frozen, please agitate it slowly until  melting again.

Advantages

■ Stable performance at high temperature and alkali

■ Higher  durability  from  improved strength

■ High  compressive  strength by low  W/C  ratio

■ Less  sensitive  to  water  addition  into concrete

Packaging standard

■ Bulk (21,000kg)

■ 1,100kg / IBC

■ 230kg /Drum

Guidance  for use

■ Dosage

ACYMA-W235  has  a  recommended

dosage range of 0.3 ~ 1.0 litres/100 kgs of binders  on a  basis  of undiluted  solution.

The optimum dosage of  ACYMA-W235  may depend on specific requirements of concrete properties and materials.

Health  and Safety

ACYMA-W235 contains  no  hazardous  materials and is completely transport  class free. However,  it   is recommended to use standard handling procedures with the product. Wear  gloves  and  eye  protection  and  wash  splashes  to  the   skin with soap and water at the end of shifts or at  breaks.  For  further  information  consult   the Material  Safety  Data  Sheet for  this product.