ACYMA-R630

Polycarboxylate Ether for Superplasticizer (PCE)

ACYMA-R630

Polycarboxylate Ether for Superplasticizer (PCE)

ACYMA-R630  is  PCE  that  has  excellent  slump  retention  performance  of  concrete.

In general, it can be  blended  with  other  water  reduction  type  PCE  in  order  to  enhance  concrete  quality.  It  also  can  be  used  itself  especially  for  the  jobsite  where  requires  much  longer  slump retention.

The optimum dosage  of  ACYMA-R630  may  depend on specific requirements of concrete properties  and  materials.  So,  it  is  determined    by trials  using  the  materials  and conditions.

Physical  Properties

■ Compatibility

ACYMA-R630 is compatible with all  of  PCE  products.

To achieve higher  water  reduction,  you  may  blend with other PCE which has its specific properties.

ACYMA-R630 is compatible with Ligno base plasticizer.

Do not use blending with NSFC  base superplasticizer.

Features

■ Excellent slump retention for all grade concrete to  be used with other water  reducers

■ Applicable for all grade concrete to be  used  with  other  water reducers

■ High  workability without  bleeding  or segregation

Advantages

■ Allowed long range transportation of fresh concrete  with  its  excellent  retention ability

■ Provide fresh concrete with excellent retention more  than  120 minutes.

■ Reduction of labor costs by high workability of concrete

Storage  and Handling

ACYMA-R630 should be  stored  at  room temperature  and  it  should  be  avoided  from direct sunlight. If stored in original unopened container, it will have a shelf life of twelve (12) months. If product is  frozen,  please  agitate  it  slowly  until  melting again.

Packaging standard

■ Bulk (21,000kg)

■ 1,100kg / IBC

■ 230kg  / Drum

Guidance  for use

■ Application

ACYMA-R630 is recommended to be  used  blend  ing with  other  PCE  having  high  water  reduction. For the jobsite where requires much longer slump retention, the dosage ratio of ACYMA-R630 should  be  increased  up  to 75%.

Health  and Safety

ACYMA-R630  contains  no   hazardous   materials and is completely transport  class free. However,  it   is recommended to use standard handling procedures with the product. Wear  gloves  and  eye  protection  and  wash  splashes  to  the   skin with soap and water at the end of shifts or at  breaks.  For  further  information  consult   the Material  Safety  Data  Sheet for  this product.